How Do I Apply Skidgrip?

Step 1

Thoroughly sweep the surface and ensure it is sound, dry, and free from mud, oils, and grease. Tape out any edges using masking tape.

step 1

Step 2

Mix Resin part A thoroughly with part B for 2-3 minutes until a uniform material is achieved. Pour mixed resin onto the surface and spread evenly using a 6mm serrated squeegee and allow the resin to flow flat.

step 2

Step 3

Immediately broadcast the aggregate over the surface until it is fully covered, ensuring no resin remains exposed. Remove the tape after 30 minutes and brush the aggregate into the edges.

step 3

Step 4

Once the resin has fully cured, lightly brush the surface to remove all excess aggregate. Cure time depends on the surface as well as the air temperature. In colder weather, the resin will take longer to cure, whereas in warmer weather the resin cures faster.

step 4

footer report